Industrial Bulk Products

Showing all 10 results

  • Description

    Broxo 6-15 Water Softening Salt
    Sodium Chloride NaCl  – 99.8%

    Features

    Calcium and magnesium ions cause hard water
    In water softeners these ions are exchanged against sodium ions which results in the water being softer
    The ion exchanger in the water softener must be rinsed regularly with a brine solution
    Broxo products, such as Broxo, Broxetten and BroxoBlock produce,without further complications, this brine
    They increase the effectiveness and sustainability of your water softener

    Application

    For use in Industrial water treatment applications
    Commercial Pools
    Processing Plants
    Car Washes

    Pack Sizes Available

    25kg

    49 x 25kg per pallet

    Code BROXO

    VIEW SDS
    Quick View
  • Description

    Reduced Chlorine & Bromine levels in pools & spas
    Pool Magic Chlorine Remover is compatible with all other pool chemicals
    Highly concentrated – delivering results in hours

    Application

    1. Add 50gm to lower the Chlorine level by part per million (ppm)
    2. Dissolve in a bucket of water. Add to the pool with pump running & filter operating.
    3. Measure the Chlorine level after 2 hours

    Pack Sizes Available

    25kg

    Code: PMU016

    VIEW SDS
    Quick View
  • Description

    Granular Non-Stabilised Pool Sanitiser

    Features

    Minimum available chlorine is 700gm/kg present as Calcium Hypochlorite

    Benefits

    Lowest dosage rates for Calcium Hypochlorite
    Fast acting sanitiser
    Consistent high quality
    Can be used for daily chlorination
    Nil effect on isocyanurate (stabiliser) levels

    Application

    Stabilised Pools: 35gm per 10,000lt daily dose
    Unstabilised pools: 70gm per 10,000lt daily dose – pre-dissolve in a bucket of water
    Dosage rates indicated are only a guide – refer to directions for use

    Pack Sizes Available

    2kg (6 units/carton), 4kg (4 units/carton), 10kg & 40kg

    Code: CALHYPO40

    VIEW SDS
    Quick View
  • Description

    Increases the level of calcium in swimming pools & spas

    Features

    996gm/kg Calcium Chloride
    Prevents damage caused by improper water balance

    Benefits

    Assists in maintaining the Calcium Hardness level within the correct ranges of 200-500ppm
    Promotes improved water balance
    Assists in protecting pool equipment & surfaces

    Application

    100gm will raise the Calcium Hardness by 10ppm per 10,000lt
    Product should be pre-dissolved in a bucket of water adding 2kg to 5lt of water
    If more than 6kg is needed per 50,000lt of pool water, dose separately and apply at least 12 hours apart
    Dosage rates indicated are only a guide, refer to directions for use

    Pack Sizes Available

    Rigid: 10kg
    Flexi: 2kg (10 units/carton), 4kg & 25kg

    Code CALHARD25

    VIEW SDS
    Quick View
  • Description

    Increases pH of  water for correct water balance

    Features

    1000gm/kg Sodium Carbonate

    Benefits

    Provides comfort to bathers
    Promotes improved water balance
    Protects metal fittings from corrosion
    Ideal pH improves bather comfort

    Application

    Ideal pH should be between 7.2 – 7.8
    Dosage rates per 10,000lt
    pH <6.8 – add 100gm
    pH 6.8 – 7.0 – add 80gm
    pH 7.1 – 7.2 – add 40gm
    pH 7.2 – 7 – add 0gm
    Dosage rates indicated are only a guide – refer to directions for use

    Pack Size Available

    25Kg

    Code SASH25

    VIEW SDS
    Quick View
  • Description

    Granular form of clarifier to settle suspended dirt particles in water

    Features

    1000gm/kg Aluminium Sulphate
    Improves filtration

    Benefits

    Clarifies swimming pool water

    Application

    Raise pH to 8.2 in order to achieve best results 400gm/10,000lt
    Allow the sediment to settle (this may take 24 – 36 hours)
    Vacuum to waste
    Dosage rates indicated are only a guide
    Refer to directions for use

    Pack Sizes Available

    25kg

    Code FLOC25

    VIEW SDS

     

    Quick View
  • Description

    Increases Total Alkalinity

    Features

    1000gm/kg Sodium Bicarbonate
    Serves as a pH buffer
    Prevents extreme pH fluctuations

    Benefits

    Assists in maintaining the Total Alkalinity within the correct ranges of 80-150ppm
    Enhances swimmer comfort
    Assists in protecting pool equipment & surfaces

    Application

    200gm will raise the Total Alkalinity by 10ppm per 10,000lt
    Pour directly into water prior to use or mix in a bucket of water as per directions for use
    Dosage rates indicated are only a guide
    Refer to directions for use

    Pack Sizes Available

    25Kg

    Code ALK25

    VIEW SDS
    Quick View
  • Description

    Decreases pH in swimming pool water

    Features

    100% Sodium Bisulphate powder
    Alternative to liquid pool acid
    Product designed in granular form for lowering pH

    Benefits

    Lowers pH in swimming pools & spas
    Spills can be cleaned more easily than Liquid Acid
    Suitable as a stain treatment in some instances
    Non DG

    Application

    Add the correct amount of dry acid as a slurry mix to the pool water at no greater than,
    10gm per 1000lt per day
    Dosage rates indicated are only a guide
    Refer to directions for use

    Pack Sizes Available

    25Kg

    Code PHDOWN25

    VIEW SDS
    Quick View
  • Description

    Protects chlorine from the sun

    Features

    996gm/kg Cyanuric Acid – Fast dissolving

    Benefits

    Allows Chlorine to work more efficiently by protecting it from the sun
    Reduces Chlorine demand
    Add directly to skimmer

    Application

    The level of Cyanuric Acid (stabiliser) should be tested every 6-8 weeks depending upon rainfall
    200gm per 10,000lt to raise Cyanurate level by approx. 20ppm
    Add directly to skimmer while pump is running, ensure the product is administered slowly
    Refer to directions for use
    Dosage rates indicated are only a guide

    Caution: Don’t over-stabilise your pool – this could cause Chlorine lock

    Pack Sizes Available

    25kg

    Code STABF25

    VIEW SDS
    Quick View
  • Description

    Granular Non-Stabilised Pool Sanitiser
    Extruded beaded technology – ideal for Prominent Pro Cal Systems
    Low Dust
    Beaded extruded technology

    Features

    Minimum available chlorine is 700gm/kg present as Calcium Hypochlorite
    Low residue chlorine beads
    Low dust

    Benefits

    Lowest dosage rates for Calcium Hypochlorite
    Fast acting sanitiser
    Consistent high quality
    Can be used for daily chlorination
    Nil effect on Isocyanurate (stabiliser) levels

    Application

    Stabilised Pools: 35gm per 10,000lt daily dose
    Unstabilised pools: 70gm per 10,000lt daily dose – pre-dissolve in a bucket of water
    Dosage rates indicated are only a guide – refer to directions for use

    Pack Sizes Available

    2kg (6 units/carton), 4kg (4 units/carton), 10kg & 40kg

    Code PMC004

    VIEW SDS
    Quick View
X