Bulk Water Treatment Chemicals Commercial / Industrial / Domestic

Showing 13–20 of 20 results

  • Description

    Reduced Chlorine & Bromine levels in pools & spas

    Features

    Use to lower or eliminate Chlorine or Bromine levels in pools

    Benefits

    Pool Magic Chlorine Remover is compatible with all other pool chemicals.

    Highly concentrated – delivering results in hours.

    Application

    1. Add 50gm to lower the chlorine level by part per million (ppm).
    2. Dissolve in a bucket of water. Add to the pool with pump running & filter operating.
    3. Measure the chlorine level after 2 hours.

    Pack Sizes Available

    25Kg

    Code PMU016

    VIEW SDS

     

    Quick View
  • Description

    Sanitiser tablets for spas

    Features

    650gm/kg Minimum available Bromine
    280gm/kg Minimum available Chlorine

    Benefits

    No residue, slow dissolving & contains no
    calcium
    Fully soluble & has a minimal effect on pH
    Ideal sanitiser for water >26°C

    Application

    Shock: 6 Tabs/1000lt
    Dosage: 1 Tab / 1000lt
    Dosage rates indicated are only a guide
    Refer to directions for use

    Pack Sizes Available

    25kg

    Code: PMT002

    VIEW SDS
    Quick View
  • Description

    Decreases pH in swimming pool water

    Features

    100% Sodium Bisulphate Powder
    Alternative to Liquid Pool Acid
    Product designed in granular form for lowering pH

    Benefits

    Lowers pH in swimming pools & spas
    Spills can be cleaned more easily than Liquid Acid
    Suitable as a stain treatment in some instances
    Non DG

    Application

    Add the correct amount of dry acid as a slurry mix to the pool water at
    no greater than 10gm per 1000lt per day
    Dosage rates indicated are only a guide
    Refer to directions for use

    Pack Sizes Available

    25Kg

    Code: PHDOWN25

    VIEW SDS
    Quick View
  • Description

    Protects Chlorine from the sun

    Features

    996gm/kg Cyanuric Acid – Fast dissolving

    Benefits

    Allows Chlorine to work more efficiently by protecting it from the sun
    Reduces Chlorine demand
    Add directly to skimmer

    Application

    The level of Cyanuric Acid (stabiliser) should be tested every 6-8 weeks depending upon rainfall
    Dosage rates indicated are only a guide
    Refer to directions for use
    200gm per 10,000lt to raise Cyanurate level by approx. 20ppm
    Add directly to skimmer while pump is running,
    ensure the product is administered slowly

    Caution  Dont over-stabilise your pool – this could cause Chlorine lock

    Pack Sizes Available

    25Kg

    Code: STABF25

    VIEW SDS
    Quick View
  • Description

    Increases the level of calcium in swimming pools & spas

    Features

    996gm/kg Calcium Chloride
    Prevents damage caused by improper water balance

    Benefits

    Assists in maintaining the Calcium Hardness level within the correct ranges of 200-500ppm
    Promotes improved water balance
    Assists in protecting pool equipment & surfaces

    Application

    100gm will raise the Calcium Hardness by 10ppm per 10,000lt
    Product should be pre-dissolved in a bucket of water adding 2kg to 5lt of water
    If more than 6kg is needed per 50,000lt of pool water, dose separately and apply at least 12 hours apart
    Dosage rates indicated are only a guide, refer to directions for use

    Pack Sizes Available

    Rigid: 10kg,
    Flexi: 2kg (10 units/carton), 4kg & 25kg Bulk Bags

    Code: CALHARD25

    VIEW SDS
    Quick View
  • Description

    Increases Total Alkalinity in swimming pools

    Features

    1000gm/kg Sodium Bicarbonate
    Serves as a pH buffer
    Prevents extreme pH fluctuations

    Benefits

    Assists in maintaining the Total Alkalinity within the correct ranges of 80-150ppm
    Enhances swimmer comfort
    Assists in protecting pool equipment & surfaces

    Application

    200gm will raise the Total Alkalinity by 10ppm per 10,000lt
    Pour directly into water prior to use or mix in a bucket of water

    Dosage rates indicated are only a guide
    Refer to directions for use

    Pack Sizes Available

    25Kg

    Code: ALK25

    VIEW SDS
    Quick View
  • Description

    Increases pH of pool water for correct water balance

    Features

    1000gm/kg Sodium Carbonate, assists in pool surface protection

    Benefits

    Promotes improved water balance
    Protects metal fittings from corrosion
    Ideal pH improves swimmer comfort

    Application:

    Ideal pH should be between 7.2 – 7.8
    Dosage rates per 10,000lt
    pH <6.8 – add 100gm
    pH 6.8 – 7.0 – add 80gm
    pH 7.1 – 7.2 – add 40gm
    pH 7.2 – 7 – add 0gm
    Dosage rates indicated are only a guide – refer to directions for use

    Pack Size Available

    25Kg

    Code: SASH25

     

    VIEW SDS
    Quick View
  • Description

    Granular Form Clarifier to clear very cloudy pool water

    Features

    1000gm/kg Aluminium Sulphate
    Improves filtration

    Benefits

    Clarifies swimming pool water

    Application

    Raise pH to 8.2 in order to achieve best results
    400gm/10,000lt
    Pre-dissolve in a bucket of water then distribute the mix over the entire pool
    Allow the sediment to settle (this may take 24 – 36 hours)
    Vacuum to waste

    Dosage rates indicated are only a guide
    Refer to directions for use

    Pack Sizes Available

    25Kg

    Code: FLOC25

    VIEW SDS
    Quick View
$0.00
X