Browse products

Showing 1–12 of 65 results

    • Optional Amperometic cells for Free Chlorine and Total Chlorine available
    • Controller & Flow Cell are mounted in a hinged, lockable cabinet
    • 2 x Proportional Outputs & 2 x ON/OFF outputs
    • Dot matrix backlit LCD displays measured Chlorine (mg/L), temperature, date & time
    • Programmable power-on delay
    • High and low mg/L, and max dosing alarms
    • 4-20mA for mg/L & 4-20mA for temperature
    • Serial port for printer allows log printing
    • RS485 for remote control
    • Programmable cleaning output
    • Can also be used for Hydrogen Peroxide, Ozone or Peracetic Acid Amperometric measuring cells

     

    Specifications

     

    Configuration Controller & Pumps Mounted In Cabinet, Wall Mount
    Variables Measured Cl2, CLO2, H2O2, Temperature
    Inputs Amperometric Sensor, Flow Switch Contact, Tank Level Dry Contact
    Max Pressure / Temp 0.5 bar @ 40°C
    IP Rating IP65
    Quick View
    • Optional Amperometic cells for Free Chlorine and Total Chlorine available
    •  Controller & Flow Cell
    • 2 x Proportional Outputs & 2 x ON/OFF outputs
    • Dot matrix backlit LCD displays measured Chlorine (mg/L), temperature, date & time
    • Programmable power-on delay
    • High and low mg/L, and max dosing alarms
    • 4-20mA for mg/L & 4-20mA for temperature
    • Serial port for printer allows log printing
    • RS485 for remote control
    • Programmable cleaning output
    • Can also be used for Hydrogen Peroxide, Ozone or Peracetic Acid Amperometric measuring cells

     

    Specifications

     

    Configuration Wall Mount, PVC Backboard Mounted
    Variables Measured Cl2, CLO2, H2O2, Temperature
    Inputs Amperometric Sensor, Flow Switch Contact, Tank Level Dry Contact
    Max Pressure / Temp 0.5 bar @ 40°C
    IP Rating IP65

     

     

     

    Quick View
    • Programmable for use with full range of amperometric cells (eg. for measuring free chlorine, total chlorine, hydrogen peroxide, ozone or peracetic acid)
    • 2 x Proportional Outputs & 2 x ON/OFF outputs
    • Dot matrix backlit LCD displays measured Chlorine (mg/L), temperature, date & time
    • Programmable power-on delay
    • High and low mg/L, and max dosing alarms
    • 4-20mA for mg/L & 4-20mA for temperature
    • Serial port for printer allows log printing
    • RS485 for remote control
    • Programmable cleaning output

     

    Specifications

     

     

    Configuration Wall Mount
    Variables Measured Cl2, CLO2, Flow Status, H2O2
    Inputs Amperometric Sensor, Flow Switch Contact, Standby Dry Contact, Tank Level Dry Contact
    Outputs 4-20mA, Alarm Relay, Pulse, Switched Relays For Optional Pumps/Valves
    IP Rating IP65
    Quick View
    • PID CL2 Controller
    • Encoder wheel menu
    • 2 Pulse, 2 Relay & 1 PID 4-20mA control outputs
    • 4-20mA outputs for ppm, Temp & PID control
    • Alarm & cleaning relays
    • mA or pulse water meter input for Feedforward control (SCL probes & flow cell optional)
    • Communication via ermes Webserver or modbus
    • EMEC LDSCL PLUS-3G includes 3G connection to ermes Webserver
    • EMEC LDSCL PLUS-LAN includes ethernet connection to ermes Webserver
    • EMEC LDSCL PLUS-MODBUS includes modbus RTU interface

     

    Specifications

     

    Configuration                   Wall Mount

    Variables Measured        Cl2, CLO2, Flow Status, Temperature

    Inputs                                 Amperometric Sensor, Flow Switch Contact, mA or pulse Flow Input,

                                                 Standby Dry Contact, Tank Level Dry Contact

    Outputs                               4-20mA, Alarm Relay, Pulse, Switched Relays For Optional Pumps/Valves

    IP Rating                            IP65

    Remote Comms               Via Optional LAN card, Via Optional Modbus, Via Optional Modem

    Quick View
    • PID pH Controller
    • Encoder wheel menu
    • 2 Pulse, 2 Relay & 1 PID 4-20mA control outputs
    • 4-20mA outputs for pH, Temp & PID control
    • Alarm & cleaning relays
    • mA or pulse water meter input for Feedforward control
    • Communication via ermes Webserver or modbus
    • EMEC LDSPH PLUS-3G includes 3G connection to ermes Webserver
    • EMEC LDSPH PLUS-LAN includes ethernet connection to ermes Webserver
    • EMEC LDSPH PLUS-MODBUS includes modbus RTU interface

     

    Specifications

     

     

    Configuration Wall Mount
    Variables Measured Flow Status, pH, Temperature
    Inputs Flow Switch Contact, mA or pulse Flow Input, pH Probe, Standby Dry Contact, Tank Level Dry Contact
    Outputs 4-20mA, Alarm Relay, Pulse, Switched Relays For Optional Pumps/Valves
    IP Rating IP65
    Remote Comms Via Optional LAN card, Via Optional Modbus, Via Optional Modem
    Quick View
    • Includes foot valve, Injection valve, 2M of Suction tubing and 2M of Discharge tubing
    • Reliable & accurate dosing
    • Manual Speed adjustment (1-100%) for varying dose rate OR via external 4/20mA or contact closures with PULSE MULTIPLY and PULSE DIVIDE
    • Adjustable stroke length (10-100%)
    • Float on foot valve stops pump dosing when chemical level in tank is low
    • Double ball check valves in foot valve, suction & discharge valves
    • Solid Teflon diaphragm prevents wear
    • Spring loaded injection valve with ceramic ball
    • Simple mounting
    • PVDF Head

     

    Specifications

     

    Configuration Foot Mount, Wall Mount with Optional Bracket
    Variables Measured Level
    Inputs 4-20mA, Pulse, Tank Level Dry Contact, Water Meter Make-up Pulses
    Max Flow / Pressure (Head) 1 l/hr @ 20 bar, 10 l/hr @ 5 bar, 18 l/hr @ 2 bar, 2 l/hr @ 18 bar, 5 l/hr @ 10 bar
    Process Connection 1/2 inch BSP Male
    Materials Ceramic Balls, EPDM O-rings & Seats, FKM B O-rings & Seats, PTFE Diaghragm/s, PVDF Head, PVDF Valve Bodies
    Max Viscosity 100 cps, 600 cps with optional SS balls
    IP Rating IP65
    Install Kit Included 4x6mm tube (<12 l/hr) or 6x8mm tube (18 l/hr), injection valve & foot valve with level float
    Optional Tube Size 1/2 inch, 3/8 inch, 5×8 or 6x9mm

     

    Other Variations Available

     

    • Model EMEC KPLUS 20 01 for max 1 l/hr @ 20 bar
    • Model EMEC KPLUS 18 02 for max 2 l/hr @ 18 bar
    • Model EMEC KPLUS 10 05 for max 5 l/hr @ 10 bar
    • Model EMEC KPLUS 05 10 for max 10 l/hr @ 5 bar
    • Model EMEC KPLUS 02 18 for max 18 l/hr @ 2 bar
    Quick View
    • Includes foot valve, Injection valve, 2M of Suction tubing and 2M of Discharge tubing
    • Reliable & accurate dosing
    • Backlit LCD Display of Strokes/Min, L/HR, PPM, etc
    • Programmable modes: Constant, Divide, Multiply, PPM, Batch, Volt, Milliamps
    • Adjustable stroke length (10-100%)
    • Optional SEFL Flow Switch alarms if pump loses prime
    • Programmable alarm relay output
    • Pump enable/standby input
    • Float on foot valve stops pump dosing when chemical level in tank is low
    • Double ball check valves in foot valve, suction & discharge valves
    • Solid Teflon diaphragm prevents wear
    • Spring loaded injection valve with ceramic ball
    • Simple mounting
    • PVDF Head

     

    Specifications

     

    Configuration Foot Mount, Wall Mount with Optional Bracket
    Variables Measured Level
    Inputs 4-20mA, Pulse, SEFL Flow Sensor, Standby Dry Contact, Tank Level Dry Contact, Water Meter Make-up Pulses
    Outputs Alarm Relay
    Max Flow / Pressure (Head) 1 l/hr @ 20 bar, 10 l/hr @ 5 bar, 2 l/hr @ 18 bar, 5 l/hr @ 10 bar
    Process Connection 1/2 inch BSP Male
    Materials Ceramic Balls, EPDM O-rings & Seats, FKM B O-rings & Seats, PTFE Diaghragm/s, PVDF Head, PVDF Valve Bodies
    Max Viscosity 100 cps, 600 cps with optional SS balls
    IP Rating IP65
    Install Kit Included 4x6mm tube, injection valve & foot valve with level float
    Optional Tube Size 1/4 inch, 3/8 inch, 5×8 or 6x9mm

     

    Other Variations Available

     

    • Model EMEC KMF 20 01 for max 1 l/hr @ 20 bar
    • Model EMEC KMF 18 02 for max 2 l/hr @ 18 bar
    • Model EMEC KMF 10 05 for max 5 l/hr @ 10 bar
    • Model EMEC KMF 05 10 for max 10 l/hr @ 5 bar
    Quick View
    • Includes foot valve, Injection valve, 2M of Suction tubing and 2M of Discharge tubing
    • Reliable & accurate dosing
    • Speed adjustment (1-100%) for varying dose rate
    • Adjustable stroke length (10-100%)
    • Double ball check valves in foot valve, suction & discharge valves
    • Solid Teflon diaphragm prevents wear
    • Spring loaded injection valve with ceramic ball
    • Simple mounting
    • PVDF Head

     

    Specifications

     

     

    Configuration Foot Mount, Wall Mount with Optional Bracket
    Max Flow / Pressure (Head) 10 l/hr @ 5 bar, 2 l/hr @ 18 bar, 5 l/hr @ 10 bar
    Process Connection 1/2 inch BSP Male
    Materials Ceramic Balls, EPDM O-rings & Seats, FKM B O-rings & Seats, PTFE Diaghragm/s, PVDF Head, PVDF Valve Bodies
    Max Viscosity 100 cps, 600 cps with optional SS balls
    IP Rating IP65
    Install Kit Included 4x6mm tube, injection valve & foot valve
    Optional Tube Size 1/4 inch, 3/8 inch, 5×8 or 6x9mm
    Quick View
    • Includes foot valve, Injection valve, 2M of Suction tubing and 2M of Discharge tubing
    • Reliable & accurate dosing with self venting (de-gassing) transparent Acrylic head
    • Suitable for dosing Sodium Hypochlorite or Hydrogen Peroxide
    • Manual Speed adjustment (1-100%) for varying dose rate OR via external 4/20mA or contact closures with PULSE MULTIPLY and PULSE DIVIDE
    • Adjustable stroke length (10-100%)
    • Float on foot valve stops pump dosing when chemical level in tank is low
    • Double ball check valves in foot valve, suction & bleed valves
    • Solid Teflon diaphragm prevents wear
    • Spring loaded injection valve with ceramic ball
    • Simple mounting

     

    Specifications

     

    Configuration Foot Mount, Wall Mount with Optional Bracket
    Variables Measured Level
    Inputs 4-20mA, Pulse, Tank Level Dry Contact, Water Meter Make-up Pulses
    Max Flow / Pressure (Head) 3.5 l/hr @ 10 bar, 7.5 l/hr @ 5 bar
    Process Connection 1/2 inch BSP Male
    Materials Ceramic Balls, FKM B O-rings & Seats, PMMA Acrylic Transparent Head, PTFE Diaghragm/s, PVDF Valve Bodies
    Max Viscosity 100 cps
    IP Rating IP65
    Install Kit Included 4x6mm tube, injection valve & foot valve with level float
    Optional Tube Size 1/4 inch, 3/8 inch, 5×8 or 6x9mm
    Quick View
    • Includes foot valve, Injection valve, 2M of Suction tubing and 2M of Discharge tubing
    • Reliable & accurate dosing
    • Manual Speed adjustment (1-100%) for varying dose rate OR via external contact closures with PULSE MULTIPLY and PULSE DIVIDE
    • Adjustable stroke length (10-100%)
    • Float on foot valve stops pump dosing when chemical level in tank is low
    • Double ball check valves in foot valve, suction & discharge valves
    • Solid Teflon diaphragm prevents wear
    • Spring loaded injection valve with ceramic ball
    • Simple mounting

     

    Specifications

     

    Configuration Foot Mount, Wall Mount with Optional Bracket
    Variables Measured Level
    Inputs 4-20mA, Pulse, Tank Level Dry Contact, Water Meter Make-up Pulses
    Max Flow / Pressure (Head) 15 l/hr @ 10 bar, 20 l/hr @ 7 bar, 40 l/hr @ 3 bar, 60 l/hr @ 2 bar
    Process Connection 1/2 inch BSP Male, 3/4 inch BSP Male
    Materials Ceramic Balls, EPDM O-rings & Seats, FKM B O-rings & Seats, PTFE Diaghragm/s, PVDF Head, PVDF Valve Bodies, SS Balls
    Max Viscosity 100 cps, 600 cps with optional SS balls
    IP Rating IP65
    Install Kit Included 4x6mm tube (<12 l/hr), 6x8mm tube (20 l/hr) or 8x12mm tube (>30 l/hr), injection valve & foot valve with level float
    Optional Tube Size 3/8 inch, 1/2 inch, 5×8, 6×9 or 9x12mm

     

     

    Quick View
    • Includes foot valve, Injection valve, 2M of Suction tubing and 2M of Discharge tubing
    • Reliable & accurate dosing Backlit LCD Display of Strokes/Min, L/HR, PPM, etc
    • Programmable modes: Constant, Divide, Multiply, PPM, Batch, Volt, Milliamps
    • Adjustable stroke length (10-100%)
    • Optional SEFL Flow Switch alarms if pump loses prime
    • Programmable alarm relay output Pump enable/standby input Float on foot valve stops pump dosing when chemical level in tank is low
    • Double ball check valves in foot valve, suction & discharge valves Solid Teflon diaphragm prevents wear

     

     

    Specifications

     

    Configuration Foot Mount, Wall Mount with Optional Bracket
    Variables Measured Level
    Inputs 4-20mA, Pulse, SEFL Flow Sensor, Standby Dry Contact, Tank Level Dry Contact, Water Meter Make-up Pulses
    Outputs Alarm Relay
    Max Flow / Pressure (Head) 15 l/hr @ 10 bar, 20 l/hr @ 7 bar, 40 l/hr @ 3 bar, 60 l/hr @ 2 bar
    Process Connection 1/2 inch BSP Male, 3/4 inch BSP Male
    Materials Ceramic Balls, EPDM O-rings & Seats, FKM B O-rings & Seats, PTFE Diaghragm/s, PVDF Head, PVDF Valve Bodies
    Max Viscosity 100 cps, 600 cps with optional SS balls
    IP Rating IP65
    Install Kit Included 4x6mm tube (<12 l/hr), 6x8mm tube (20 l/hr) or 8x12mm tube (>30 l/hr), injection valve & foot valve with level float
    Optional Tube Size 3/8 inch, 1/2 inch, 5×8, 6×9 or 9x12mm
    Quick View
    • Includes foot valve, Injection valve, 2M of Suction tubing and 2M of Discharge tubing
    • Reliable & accurate dosing with self venting (de-gassing) PVDF head
    • Suitable for dosing Sodium Hypochlorite or Hydrogen Peroxide
    • Manual Speed adjustment (1-100%) for varying dose rate OR via external 4/20mA or contact closures with PULSE MULTIPLY and PULSE DIVIDE
    • Adjustable stroke length (10-100%)
    • Float on foot valve stops pump dosing when chemical level in tank is low
    • Double ball check valves in foot valve, suction & bleed valves
    • Solid Teflon diaphragm prevents wear
    • Spring loaded injection valve with ceramic ball
    • Simple mounting

     

    Specifications

     

    Configuration Foot Mount, Wall Mount with Optional Bracket
    Variables Measured Level
    Inputs 4-20mA, Pulse, Tank Level Dry Contact, Water Meter Make-up Pulses
    Max Flow / Pressure (Head) 3 l/hr @ 15 bar
    Process Connection 1/2 inch BSP Male
    Materials Ceramic Balls, FKM B O-rings & Seats, PTFE Diaghragm/s, PVDF Head, PVDF Valve Bodies
    Max Viscosity 100 cps
    IP Rating IP65
    Install Kit Included 4x6mm tube, injection valve & foot valve with level float
    Optional Tube Size 1/4 inch, 3/8 inch, 5×8 or 6x9mm
    Quick View
X