Stain Removers & General Products

Showing all 9 results

  • Description

    Reduced Chlorine & Bromine levels in pools & spas
    Pool Magic Chlorine Remover is compatible with all other pool chemicals
    Highly concentrated – delivering results in hours

    Application

    1. Add 50gm to lower the Chlorine level by part per million (ppm)
    2. Dissolve in a bucket of water. Add to the pool with pump running & filter operating.
    3. Measure the Chlorine level after 2 hours

    Pack Sizes Available

    500gm

    Code: PMU015

     

    VIEW SDS
    Quick View
  • Description

    Polyphosphonate Blend

    Benefits

    Prevention of Calcium & Magnesium build up on pool surface
    Soften back Calcium build up on pool surfaces
    Keeps metal suspended in solution
    Reduces Calcium build up on pool surfaces
    Assists in the removal of metal stains
    Ideal when using bore or dam water as it helps keep metals in solution

    Application

    500ml per 50,000lt
    Do not exceed 1lt per 50,000lt
    You may need to floc your pool with Pool Magic Liquid Floc after use as severe precipitation may occur
    Dosage rates indicated are only a guide – refer to directions for use

    Pack Sizes Available

    1lt (12 units/carton)

    PMU010

     

    VIEW SDS
    Quick View
  • Description

    For metal stain removal in swimming pools
    Concentrated metal sequesterent that helps remove and control unwanted metals from pools & spas

    Benefits

    Sequesters and removes metals from pool water by forming complexes (chelation)
    Aids in scale removal and prevention
    Regular use will prevent the deposit of new stains and continue to reduce older  metallic stains
    Excellent as a start up for new and resurfaced pools
    This product will lower pH and Total Alkalinity
    When re adjusting bring up the pH and Total Alkalinity slowly

    Application

    200ml per 10,000lt for maintenance
    100ml per 10,000lt for stain prevention
    Dosage rates indicated are only a guide – refer to directions for use

    Pack Sizes Available

    1lt (6 units/carton)

    PMU028

    VIEW SDS
    Quick View
  • Description

    Concentrated Granular Stain Remover

    Features

    Citric Acid – high concentration

    Benefits

    Removes rust & metal stains from all pool surfaces

    Application

    Adjust pH to 7.2 and Chlorine level to 0.5ppm.
    Pre-dissolve Pool Magic Citric Stain Remover in a bucket of pool
    water before adding as a slurry to the pool.
    Dose rate of 200gm per 1000lt can cause higher demand for chlorine

    Pack Sizes Available

    1kg (6 units/carton)

    Code PMU022

    VIEW SDS
    Quick View
  • Description

    Effective & Gentle Destainer

    Features

    Easy to use & conveniently packaged
    Temporarily reverses the oxidative process caused by Chlorine on fibreglass gel coats

    Benefits

    Useful in the reduction of “black spot” in old gel coats, & other staining associated with older fibreglass pools

    Application

    Add directly to the stained area, ensuring coverage of the stain
    Dose rate will vary with the problem, but commence at 250gm up to 2kg per 50,000lt pool
    To maximise the effect of Pool Magic Fibreglass Cleaner ensure that the total Chlorine reading is run down to a
    minimum prior to the addition of Pool Magic Fibreglass Cleaner as the two compounds neutralise each other

    Pack Sizes

    2kg (6 units/carton)

    Code PMU020

    VIEW SDS
    Quick View
  • Description

    Concentrated Granular Stain Remover

    Features

    Polycarboxylic Acid – high concentration

    Benefits

    Removes rust & metal stains from all pool surfaces

    Application

    Adjust pH to 7.2 and chlorine level to 0.5ppm
    Pre-dissolve Pool Magic Stain Remover in a bucket of pool water before adding as a slurry to the pool
    Dose rate of 200gm per 1000lt can cause higher demand for chlorine

    Pack Sizes Available

    1kg (6 units/carton)

    VIEW SDS
    Quick View
  • Description

    Granular Water Softener

    Features

    Natural Alkaline Salts
    Water softener with refreshing Jasmine scent
    No residue
    Absorbs Calcium
    Compatible with all types of spa sanitisers

    Benefits

    Reduces eye & skin irritation
    Adds a pleasant jasmine scent to the spa water
    Softens water by absorbing Calcium
    Enhances water clarity & swimmer comfort
    Improves water quality

    Application

    Initial dose of 200gm / 1000lt
    Weekly application of 30gm / 1000lt
    Dosage rates indicated are only a guide – refer to directions for use

    Pack Sizes Available

    1kg (6 units/carton)

    Code PMU007

    VIEW SDS
    Quick View
  • Description

    Protects Salt water chlorinator cells

    Features

    1000gm/kg Magnesium Sulphate
    Softens Calcium scale build-up on salt cells

    Benefits

    Extends life of salt cell
    Increases salt cell efficiency
    Reduces normal maintenance schedules

    Application

    Mix in a bucket of water to the rate of 1kg per 10,000lt
    Disperse directly into pool
    Run filter for 3-6 hours
    Product will remain active for 6 months
    Dosage rates indicated are only a guide – refer to directions for use

    Pack Sizes Available

    4kg (4 units/cart)

     

    VIEW SDS
    Quick View
  • Description

    Polymer Calcium inhibitor

    Benefits

    Single 5lt dose lasts 6 months
    Holds Calcium in suspension up to 1000ppm
    Recommended for all pool surfaces
    Softens Calcium scale in salt cells making them easier to clean

    Application

    5lt per 60,000lt

    Pack Sizes Available

    5lt (4 units/carton)

    VIEW SDS
    Quick View
$0.00
X