Chlorine Control Systems

Showing 13–24 of 32 results

    • Includes foot valve, Injection valve, 2M of Suction tubing and 2M of Discharge tubing
    • Reliable & accurate dosing with self venting (de-gassing) transparent Acrylic head
    • Suitable for dosing Sodium Hypochlorite or Hydrogen Peroxide
    • Manual Speed adjustment (1-100%) for varying dose rate OR via external contact closures with PULSE MULTIPLY and PULSE DIVIDE
    • Adjustable stroke length (10-100%)
    • Float on foot valve stops pump dosing when chemical level in tank is low
    • Double ball check valves in foot valve, suction & bleed valves
    • Solid Teflon diaphragm prevents wear
    • Spring loaded injection valve with ceramic ball
    • Simple mounting

     

    Specifications

     

    Configuration Foot Mount, Wall Mount with Optional Bracket
    Variables Measured Level
    Inputs 4-20mA, Pulse, Tank Level Dry Contact, Water Meter Make-up Pulses
    Max Flow / Pressure (Head) 10 l/hr @ 10 bar, 13 l/hr @ 7 bar, 30 l/hr @ 3 bar, 6 l/hr @ 15 bar
    Process Connection 1/2 inch BSP Male, 3/4 inch BSP Male
    Materials Ceramic Balls, FKM B O-rings & Seats, PMMA Acrylic Transparent Head, PTFE Diaghragm/s, PVDF Valve Bodies
    Max Viscosity 100 cps
    IP Rating IP65
    Install Kit Included 4x6mm tube (<12 l/hr), 6x8mm tube (13 l/hr) or 8x12mm tube (> 20 l/hr), injection valve & foot valve with level float
    Optional Tube Size 3/8 inch, 1/2 inch, 5×8, 6×9 or 9x12mm

     

    Other Variations Available

     

    • Model EMEC AMSAPLUS 15 06 PMMA for max 6 l/hr @ 15 bar
    • Model EMEC AMSAPLUS 07 13 PMMA for max 13 l/hr @ 7 bar
    • Model EMEC AMSAPLUS 03 30 PMMA for max 30 l/hr @ 3 bar
    Quick View
    • Includes foot valve, Injection valve, 2M of Suction tubing and 2M of Discharge tubing
    • Reliable & accurate dosing with self venting (de-gassing) transparent Acrylic head
    • Suitable for dosing Sodium Hypochlorite or Hydrogen Peroxide
    • Backlit LCD Display of Strokes/Min, L/HR, PPM, etc
    • Programmable modes: Constant, Divide, Multiply, PPM, Batch, Volt, Milliamps
    • Adjustable stroke length (10-100%)
    • Optional SEFL Flow Switch alarms if pump loses prime
    • Programmable alarm relay output
    • Pump enable/standby input
    • Float on foot valve stops pump dosing when chemical level in tank is low
    • Double ball check valves in foot valve, suction & discharge valves
    • Solid Teflon diaphragm prevents wear
    • Spring loaded injection valve with ceramic ball
    • Simple mounting

     

    Specifications

     

    Configuration Foot Mount, Wall Mount with Optional Bracket
    Variables Measured Level
    Inputs 4-20mA, Pulse, SEFL Flow Sensor, Standby Dry Contact, Tank Level Dry Contact, Water Meter Make-up Pulses
    Outputs Alarm Relay
    Max Flow / Pressure (Head) 3.5 l/hr @ 10 bar, 5.5 l/hr @ 8 bar, 7.5 l/hr @ 5 bar
    Process Connection 1/2 inch BSP Male
    Materials Ceramic Balls, FKM B O-rings & Seats, PMMA Acrylic Transparent Head, PTFE Diaghragm/s, PVDF Valve Bodies
    Max Viscosity 100 cps
    IP Rating IP65
    Install Kit Included 4x6mm tube, injection valve & foot valve with level float
    Optional Tube Size 1/4 inch, 3/8 inch, 5×8 or 6x9mm

     

     

    Other Variations Available

     

    • Model EMEC KAMF 10 3.5 PMMA for max 3.5 l/hr @ 10 bar
    • Model EMEC KAMF 08 5.5 PMMA for max 5.5 l/hr @ 8 bar
    • Model EMEC KAMF 05 7.5 PMMA for max 7.5 l/hr @ 5 bar
    Quick View
    • Includes EMEC SEPR Flow sensor – Flow Indication via a Red LED
    • Tube Fittings for 6×8 tubing
    • Includes Pressure & Flow Regulator
    • Flow Adjustment Knob

     

    Specifications

     

     

    Max Pressure / Temp         0.5 bar @ 40°C

    Materials                               PMMA, PVC, PVDF

    IP Rating                               IP65

    Install Kit Included              6x8mm tube

    Quick View
    • Includes Flow Sensor – Flow Indication via LED
    • Tube Fittings for 6×8 tubing
    • Includes Pressure & Flow Regulator
    • Flow Adjustment Knob

     

    Specifications

     

     

    Max Pressure / Temp 0.5 bar @ 40°C
    Materials PMMA, PVC, PVDF
    IP Rating IP65
    Install Kit Included 6x8mm tube
    Quick View
    • Includes foot valve, Injection valve, 2M of Suction tubing and 2M of Discharge tubing
    • Reliable & accurate dosing
    • Speed adjustment (1-100%) for varying dose rate
    • Additional turndown with 10:1 speed divider
    • Double ball check valves in foot valve, suction & discharge valves
    • Solid Teflon diaphragm prevents wear
    • Spring loaded injection valve with ceramic ball
    • Simple mounting
    • PVDF head standard, PP optional for strong Caustic

     

    Specifications

     

    Configuration Wall Mount
    Max Flow / Pressure (Head) 10 l/hr @ 10 bar, 10 l/hr @ 3 bar, 17 l/hr @ 2 bar, 2 l/hr @ 15 bar, 6 l/hr @ 7 bar
    Process Connection 1/2 inch BSP Male
    Materials Ceramic Balls, EPDM O-rings & Seats, FKM B O-rings & Seats, PP Head, PP Valve Bodies, PTFE Diaghragm/s, PVDF Head, PVDF Valve Bodies, SS Balls
    Max Viscosity 100 cps, 600 cps with optional SS balls
    IP Rating IP65
    Install Kit Included 4x6mm tube (<12 l/hr) or 6x8mm tube (17 l/hr), injection valve & foot valve
    Optional Tube Size 1/4

     

    Other Variations Available

     

    • Model EMEC VCO 15 02 for max 2 l/hr @ 15 bar
    • Model EMEC VCO 07 06 for max 6 l/hr @ 7 bar
    • Model EMEC VCO 03 10 for max 10 l/hr @ 3 bar
    • Model EMEC VCO 02 15 for max 15 l/hr @ 2 bar
    Quick View
    • Includes foot valve, Injection valve, 2M of Suction tubing and 2M of Discharge tubing
    • Reliable & accurate dosing
    • Speed adjustment (1-100%) for varying dose rate
    • Additional turndown with 10:1 speed divider
    • Double ball check valves in foot valve, suction & discharge valves
    • Solid Teflon diaphragm prevents wear
    • Spring loaded injection valve with ceramic ball
    • Simple mounting
    • PVDF head with Viton B seals

     

    Specifications

     

    Configuration Wall Mount
    Max Flow / Pressure (Head) 13 l/hr @ 2 bar, 2 l/hr @ 10 bar, 4 l/hr @ 7 bar, 7 l/hr @ 3 bar
    Process Connection 1/2 inch BSP Male
    Materials Ceramic Balls, FKM B O-rings & Seats, PTFE Diaghragm/s, PVDF Head, PVDF Valve Bodies
    Max Viscosity 100 cps
    IP Rating IP65
    Install Kit Included 4x6mm tube (<12 l/hr) or 6x8mm tube (13 l/hr), injection valve & foot valve
    Optional Tube Size 1/4 inch, 3/8 inch, 5×8 or 6x9mm

     

    Other Variations Available

     

     

    • Model EMEC VACO 10 02 FP for max 2 l/hr @ 10 bar
    • Model EMEC VACO 07 04 FP for max 4 l/hr @ 7 bar
    • Model EMEC VACO 03 07 FP for max 7 l/hr @ 3 bar
    • Model EMEC VACO 02 12 FP for max 12 l/hr @ 2 bar
    Quick View
    • Includes foot valve, Injection valve, 2M of Suction tubing and 2M of Discharge tubing
    • Reliable & accurate dosing
    • De-gassing model available upon request
    • Backlit LCD Display of Strokes/Min, L/HR, PPM, etc
    • Programmable modes: Constant, Divide, Multiply, PPM, Batch, Volt, Milliamps
    • Programmable alarm relay output
    • Float on foot valve stops pump dosing when chemical level in tank is low
    • Double ball check valves in foot valve, suction & discharge valves
    • Solid Teflon diaphragm prevents wear
    • Spring loaded injection valve with ceramic ball
    • Simple mounting
    • PVDF head standard, PP optional for strong Caustic
    • Alternate code: EMEC VMSMF

     

    Specifications

     

    Configuration Wall Mount
    Variables Measured Level
    Inputs 4-20mA, Pulse, Tank Level Dry Contact, Water Meter Make-up Pulses
    Max Flow / Pressure (Head) 1 l/hr @ 5 bar, 10 l/hr @ 10 bar, 10 l/hr @ 3 bar, 17 l/hr @ 2 bar, 2 l/hr @ 15 bar, 6 l/hr @ 7 bar
    Process Connection 1/2 inch BSP Male
    Materials Ceramic Balls, EPDM O-rings & Seats, FKM B O-rings & Seats, PP Head, PP Valve Bodies, PTFE Diaghragm/s, PVDF Head, PVDF Valve Bodies, SS Balls
    Max Viscosity 100 cps, 600 cps with optional SS balls
    IP Rating IP65
    Install Kit Included 4x6mm tube (<12 l/hr) or 6x8mm tube (17 l/hr), injection valve & foot valve with level float
    Optional Tube Size 1/4 inch, 3/8 inch, 5×8 or 6x9mm

     

    Other Variations Available

     

    • Model EMEC VMF 05 01 for max 1 l/hr @ 5 bar
    • Model EMEC VMF 15 02 for max 2 l/hr @ 15 bar
    • Model EMEC VMF 07 06 for max 6 l/hr @ 7 bar
    • Model EMEC VMF 03 10 for max 10 l/hr @ 3 bar
    • Model EMEC VMF 02 15 for max 15 l/hr @ 2 bar
    Quick View
    • Includes foot valve, Injection valve, 2M of Suction tubing and 2M of Discharge tubing
    • Viton seals (suitable for dosing Acid only)
    • Reliable & accurate dosing
    • Float on foot valve stops pump dosing when chemical level in tank is low
    • Speed adjustment automatic (demand dependent)
    • Double ball check valves in foot valve, suction & discharge valves
    • Solid Teflon diaphragm prevents wear
    • Pump enable/standby input
    • Spring loaded injection valve with ceramic ball
    • Simple mounting
    • PVDF head – PP available for strong Caustic

     

    Specifications

     

    Configuration Wall Mount
    Variables Measured Level, pH
    Inputs pH Probe, Standby Dry Contact, Tank Level Dry Contact
    Max Flow / Pressure (Head) 1 l/hr @ 5 bar, 6 l/hr @ 7 bar
    Process Connection 1/2 inch BSP Male
    Materials Ceramic Balls, EPDM O-rings & Seats, FKM B O-rings & Seats, PP Head, PP Valve Bodies, PTFE Diaghragm/s, PVDF Head, PVDF Valve Bodies, SS Balls
    Max Viscosity 100 cps, 600 cps with optional SS balls
    IP Rating IP65
    Install Kit Included 4x6mm tube, injection valve & foot valve with level float
    Optional Tube Size 1/4 inch, 3/8 inch, 5×8 or 6x9mm

     

    Other Variations Available

     

    • Model EMEC VMSPO 05 01 for max 1 l/hr @ 5 bar
    • Model EMEC VMSPO 07 06 for max 6 l/hr @ 7 bar
    Quick View
    • Includes foot valve, Injection valve, 2M of Suction tubing and 2M of Discharge tubing
    • Viton seals (suitable for dosing Sodium Hypochlorite)
    • Reliable & accurate dosing with self venting (de-gassing) head
    • Float on foot valve stops pump dosing when chemical level in tank is low
    • Speed adjustment automatic (demand dependent)
    • Double ball check valves in foot valve, suction & bleed valves
    • Solid Teflon diaphragm prevents wear
    • Pump enable/standby input
    • Spring loaded injection valve with ceramic ball
    • Simple mounting

     

    Specifications

     

     

    Configuration Wall Mount
    Variables Measured Level, ORP
    Inputs ORP Probe, Standby Dry Contact, Tank Level Dry Contact
    Max Flow / Pressure (Head) 4 l/hr @ 7 bar
    Process Connection 1/2 inch BSP Male
    Materials Ceramic Balls, FKM B O-rings & Seats, PTFE Diaghragm/s, PVDF Head, PVDF Valve Bodies
    Max Viscosity 100 cps
    IP Rating IP65
    Install Kit Included 4x6mm tube, injection valve & foot valve with level float
    Optional Tube Size 1/4 inch, 3/8 inch, 5×8 or 6x9mm
    Quick View
    • Includes foot valve, Injection valve, 2M of Suction tubing and 2M of Discharge tubing
    • Reliable & accurate dosing
    • Backlit LCD Display of Strokes/Min, L/HR, PPM, etc
    • Programmable modes: Constant, Divide, Multiply, PPM, Batch, Volt, Milliamps
    • Programmable alarm relay output
    • Float on foot valve stops pump dosing when chemical level in tank is low
    • Double ball check valves in foot valve, suction & discharge valves
    • Solid Teflon diaphragm prevents wear
    • Spring loaded injection valve with ceramic ball
    • Simple mounting
    • PVDF head with Viton B seals

     

    Specifications

     

    Configuration Wall Mount
    Variables Measured Level
    Inputs 4-20mA, Pulse, Tank Level Dry Contact, Water Meter Make-up Pulses
    Max Flow / Pressure (Head) 2 l/hr @ 10 bar, 4 l/hr @ 7 bar
    Process Connection 1/2 inch BSP Male
    Materials Ceramic Balls, FKM B O-rings & Seats, PTFE Diaghragm/s, PVDF Head, PVDF Valve Bodies
    Max Viscosity 100 cps
    IP Rating IP65
    Install Kit Included 4x6mm tube (<12 l/hr) or 6x8mm tube (13 l/hr), injection valve & foot valve with level float
    Optional Tube Size 1/4 inch, 3/8 inch, 5×8 or 6x9mm

     

    Other Variations Available

     

    • Model EMEC VAMF 10 02 FP for max 2 l/hr @ 10 bar
    • Model EMEC VAMF 07 04 FP for max 4 l/hr @ 7 bar
    • Model EMEC VAMF 03 07 FP for max 7 l/hr @ 3 bar
    • Model EMEC VAMF 02 12 FP for max 12 l/hr @ 2 bar
    Quick View
    • Includes foot valve, Injection valve, 2M of Suction tubing and 2M of Discharge tubing
    • Reliable & accurate dosing
    • Speed adjustment (1-100%) for varying dose rate
    • Additional turndown with 10:1 speed divider
    • Double ball check valves in foot valve, suction & discharge valves
    • Solid Teflon diaphragm prevents wear
    • Spring loaded injection valve with ceramic ball
    • Simple mounting
    • PVDF head standard

     

    Specifications

     

    Configuration Wall Mount
    Max Flow / Pressure (Head) 20 l/hr @ 4 bar, 30 l/hr @ 3 bar
    Process Connection 1/2 inch BSP Male
    Materials Ceramic Balls, EPDM O-rings & Seats, FKM B O-rings & Seats, PTFE Diaghragm/s, PVDF Head, PVDF Valve Bodies, SS Balls
    Max Viscosity 100 cps
    IP Rating IP65
    Install Kit Included 6x8mm tube (20 l/hr) or 8x12mm tube (30 l/hr), injection valve & foot valve
    Optional Tube Size 3/8 inch, 1/2 inch, 5×8, 6×9 or 9x12mm

     

    Other Variations Available

     

    • Model EMEC TCO 04 20 for max 20 l/hr @ 4 bar
    • Model EMEC TCO 03 30 for max 30 l/hr @ 3 bar
    Quick View
    • 1/2 inch Pressure reducing valve with 15mm Orifice
    • Pressure gauge
    • Maximum supply pressure: 16 Bar
    • Adjustable from 100kPa – 600kPa (1-6 Bar)
    • Internal strainer
    • Suitable for use with Amperometric cells, or other pressure-sensitive instrumentation

     

    Specifications

     

     

    Port Size 1/2 inch BSP Female
    Materials Brass Body
    IP Rating IP65
    Quick View
X