orders@klorman-industries.com NSW Head Office: +61 2 9773 0934 | SA/NT Office: +61 8 8447 8684 NSW: +61 2 9773 0934 | SA/NT: +61 8 8447 8684
 

Browse products

Home > Browse products (Page 5)

Showing 49–60 of 65 results

  • Description

    Increases pH of  water for correct water balance

    Features

    1000gm/kg Sodium Carbonate

    Benefits

    Provides comfort to bathers
    Promotes improved water balance
    Protects metal fittings from corrosion
    Ideal pH improves bather comfort

    Application

    Ideal pH should be between 7.2 – 7.8
    Dosage rates per 10,000lt
    pH <6.8 – add 100gm
    pH 6.8 – 7.0 – add 80gm
    pH 7.1 – 7.2 – add 40gm
    pH 7.2 – 7 – add 0gm
    Dosage rates indicated are only a guide – refer to directions for use

    Pack Size Available

    25Kg

    Code SASH25

    VIEW SDS
    Quick View

  • Description

    Granular form of clarifier to settle suspended dirt particles in water

    Features

    1000gm/kg Aluminium Sulphate
    Improves filtration

    Benefits

    Clarifies swimming pool water

    Application

    Raise pH to 8.2 in order to achieve best results 400gm/10,000lt
    Allow the sediment to settle (this may take 24 – 36 hours)
    Vacuum to waste
    Dosage rates indicated are only a guide
    Refer to directions for use

    Pack Sizes Available

    25kg

    Code FLOC25

    VIEW SDS

     

    Quick View

  • Description

    Increases the level of calcium in swimming pools & spas

    Features

    996gm/kg Calcium Chloride
    Prevents damage caused by improper water balance

    Benefits

    Assists in maintaining the Calcium Hardness level within the correct ranges of 200-500ppm
    Promotes improved water balance
    Assists in protecting pool equipment & surfaces

    Application

    100gm will raise the Calcium Hardness by 10ppm per 10,000lt
    Product should be pre-dissolved in a bucket of water adding 2kg to 5lt of water
    If more than 6kg is needed per 50,000lt of pool water, dose separately and apply at least 12 hours apart
    Dosage rates indicated are only a guide, refer to directions for use

    Pack Sizes Available

    Rigid: 10kg
    Flexi: 2kg (10 units/carton), 4kg & 25kg

    Code CALHARD25

    VIEW SDS
    Quick View

  • Description

    Increases Total Alkalinity

    Features

    1000gm/kg Sodium Bicarbonate
    Serves as a pH buffer
    Prevents extreme pH fluctuations

    Benefits

    Assists in maintaining the Total Alkalinity within the correct ranges of 80-150ppm
    Enhances swimmer comfort
    Assists in protecting pool equipment & surfaces

    Application

    200gm will raise the Total Alkalinity by 10ppm per 10,000lt
    Pour directly into water prior to use or mix in a bucket of water as per directions for use
    Dosage rates indicated are only a guide
    Refer to directions for use

    Pack Sizes Available

    25Kg

    Code ALK25

    VIEW SDS
    Quick View

  • Description

    Watertech Sodium Fluoride (NaF)

    Features

    95% Sodium Fluoride (NaF)

    Application

    For use in Industrial water treatment applications only

    Unique design for use with Prominent dosing systems

    Pack Sizes Available
    5kg (4 units/carton)

    Code WTNAF5

     

    VIEW SDS
    Quick View

  • Description

    150gm Trichloroisocyanuric tablet

    Features

    Minimum available chlorine is 900gm/kg
    Has a centre hole for use in the septic tank market
    75mm in Diameter
    Contains Isocyanuric Acid (stabiliser)
    Low pH

    Benefits

    Strong Chlorine for efficient sanitation
    Slow dissolving & long lasting
    Reduces demand for Stabiliser
    Lowers pH for more efficient Chlorine action
    No requirement for daily dosing

    Application

    For use in all water treatment application
    Used in the Septic tank treatment

    Pack Sizes Available
     50kg

    Code WTTH50

    VIEW SDS
    Quick View

  • Description

    200gm Trichloroisocyanurate Tablet

    Features

    Minimum available chlorine is 890gm/kg
    75mm in Diameter
    Contains Isocyanuric Acid (stabiliser)
    Low pH

    Benefits

    Strong chlorine for efficient sanitation
    Slow dissolving & long lasting
    Reduced demand for Stabiliser
    Lowers pH for more efficient Chlorine action
    No requirement for daily dosing

    Application

    Septic Tanks and Swimming Pools
    Dosage rates indicated are only a guide
    Refer to directions for use

    Pack Sizes Available

    25kg

    Code TRICHLOR25

    VIEW SDS
    Quick View

  • Description

    20g Trichloroisocyanurate Tablet

    Features

    Minimum available chlorine is 890gm/kg
    25mm in Diameter
    Contains Isocyanuric Acid (stabiliser)
    Low pH

    Benefits

    Strong chlorine for efficient sanitation
    Reduced demand for Stabiliser
    Lowers pH for more efficient Chlorine action
    No requirement for daily dosing
    Smaller tablet allows more surface area exposed to water for effective chlorination

    Application

    10 x tablets per 10,000lt per week
    Dosage rates indicated are only a guide
    Refer to directions for use

    Pack Sizes Available

    2kg & 50kg

    Code TRICHLORMINI

    VIEW SDS
    Quick View

  • Description

    Protects chlorine from the sun

    Features

    996gm/kg Cyanuric Acid – Fast dissolving

    Benefits

    Allows Chlorine to work more efficiently by protecting it from the sun
    Reduces Chlorine demand
    Add directly to skimmer

    Application

    The level of Cyanuric Acid (stabiliser) should be tested every 6-8 weeks depending upon rainfall
    200gm per 10,000lt to raise Cyanurate level by approx. 20ppm
    Add directly to skimmer while pump is running, ensure the product is administered slowly
    Refer to directions for use
    Dosage rates indicated are only a guide

    Caution: Don’t over-stabilise your pool – this could cause Chlorine lock

    Pack Sizes Available

    25kg

    Code STABF25

    VIEW SDS
    Quick View

  • Safe, easy, reliable chlorination is available with the KLORMAN 1000 Chlorination Unit. With the use of the patented HYPOCHLOR cartridge in the KLORMAN 1000 Chlorination Unit, you can eliminate the problems and complications faced when using alternative systems.

    KLORMAN 1000 Chlorination Unit is an advanced system for continuous, controlled practical dosing of solid Chlorine into water systems. Chlorine treatment of water is proven in its ability to kill disease-causing organisms; remove odors, slime, algae growth and other contaminants.

     

    Fully adjustable, the KLORMAN 1000 Chlorination Unit can supply from less than 5 ppm to over 200 ppm.

     

    Ideal for the following application

    • Post Harvest Spray Tunnels
    • Nurseries
    • Dairy Farms
    • Animal Shelters
    • Caravan Parks
    • Sporting Clubs

     

    Easily installed, the KLORMAN 1000 Chlorination Unit can be mounted in-line in existing pipework. Or using the preferred by-pass installation method

     

    Extremely durable, the KLORMAN 1000 Chlorination Unit is durable and easy to operate with no moving parts to wear out, saving on maintenance, operating costs and chlorine usage.

    The KLORMAN 1000 Chlorination Unit provides an economical, safe and reliable means of water chlorination, making chlorine sanitation available to everyone.

    BY- PASS set up – preferred

     

    Click Link Below

     

    Klorman In Line Unit

     

    IMPORTANT

    • Do not exceed 80psi with the KM1000
    • Prime all surface before you glue them in with high pressure glue, allow 48 hours to dry and cure
    • Avoid water hammer through the unit as it will crack
    Quick View

  • Description

    Pool Magic Low Fume Pool Acid

    Ideal for in-closed areas, pump rooms at aquatic centres

    Features

    Minimum available concentration is 440gm/lt
    32% Sulphuric Acid

    Benefits

    Low Fume
    Lowers pH & Total Alkalinity in swimming pools & spas
    Fast acting pH reducer
    Consistent high quality

    Application

    Dosage rate is dependent on the pH and Total Alkalinity level
    Dosage rates indicated are only a guide
    Pour directly into water – refer to directions for use

    CAUTION: Highly corrosive, wear appropriate personal protection equipment when using this product

    Pack Sizes Available
    15lt

    Code ACIDLF15

    VIEW SDS
    Quick View

  • Description

    Decreases pH in swimming pool water

    Features

    100% Sodium Bisulphate powder
    Alternative to liquid pool acid
    Product designed in granular form for lowering pH

    Benefits

    Lowers pH in swimming pools & spas
    Spills can be cleaned more easily than Liquid Acid
    Suitable as a stain treatment in some instances
    Non DG

    Application

    Add the correct amount of dry acid as a slurry mix to the pool water at no greater than,
    10gm per 1000lt per day
    Dosage rates indicated are only a guide
    Refer to directions for use

    Pack Sizes Available

    25Kg

    Code PHDOWN25

    VIEW SDS
    Quick View
X